Outdoor inspection access panel, MPWJA System – Medium-sized exterior inspection access panel for masonry walls

MPWJA is an inspection access hatch made with aluminum profiles and a cementitious panel, and equipped with one or more snap-lock stainless steel closures.

The frame has a thickness of 15 mm, while the 12.5 mm cementitious panel is recessed to allow flush skim coating. Externally, the 60 mm thick frame is designed for installation on block or brick walls, either by means of anchoring brackets or by fixing with wall plugs.
The hinges fixed to the frame allow the door to open to 90°. In addition, the hatch is supplied with one or more safety cables with carabiner, to be reattached after each opening.

The 3 mm gap between the frame and the door is fitted with an air- and dust-tight gasket.

Download and use the technical manuals, images, and catalogs available on this product page. For further information, contact the FF Systems technical staff using the dedicated contact form.