Floor Access Cover, 4500 series stainless steel

Overview

Series 4500 is a floor access cover for indoor floors where finish continuity is critical and the access cover must remain discreet. It is a stainless steel inspection solution intended for clean architectural detailing.

Technical features

The floor access cover is made of 2.5 mm stainless steel. The tray depth is 40 mm and the installation height is 45 mm. The frame is equipped with a special gasket along the entire perimeter. The frame is fixed by casting at floor leveland, thanks to special hinges, the lid can be opened up to 105 degrees. Safety is supported by a fall arrest device. When closed, there are two clamping points used for opening with lifting keys. The lid height is 20 mm, supporting integration with the finished floor.

Project advantages

⦁    Almost invisible when installed once the finish is completed.
⦁    Controlled hinged opening, useful where access must be repeatable and guided.
⦁    A consistent detail for high-quality indoor architectural contexts.

Operational notes

Series 4500 is designed for indoor use; the chosen filling and professional installation strongly influence performance and final appearance.

Download documentation on Syncronia

On Syncronia.com you can free download images, catalogues and technical data sheets download for Series 4500, with the documentation needed to specify it and integrate it into your project set.