Inspection covers, F1 System - Inspection access panel with plasterboard panel and fixed hinges

The F1 by FF Systems is an inspection access panel made of aluminum profiles with a moisture-resistant impregnated gypsum board panel, available in various thicknesses: 12.5 mm, 15 mm, or 25 mm, and equipped with two or more snap locks.

The two frames that make up the access panel consist of four profiles welded together using a special process.
From the 300 × 300 mm size onwards, the F1 system is supplied with one or more safety cables with snap hooks, which must be reattached after each opening of the panel. The panel closures are snap-fit and invisible, featuring a simple pressure-based system for opening the inspection access panel.

The F1 inspection panel can be installed both on ceilings and on walls, with side opening for this type of application.

On this page, FF Systems provides Syncronia files useful for the design and installation of the F1 access panel. In detail, it is possible to download technical data sheets, the installation manual, technical drawings, and representative product images.