Wall hatch, System F3 - Inspection hatch for tileable walls

F3, flush-to-wall inspection hatch, made of aluminum profiles and water-repellent impregnated gypsum board, available in thicknesses of 12.5 mm, 15 mm, or 25 mm, and equipped with two or more snap-lock closing systems.

Both frames of the hatch consist of four profiles solidly joined together through a special process.

Starting from dimensions of 300 × 300 mm, the hatch is supplied complete with one or more safety cables with carabiner, to be reattached after each opening of the door.

Between the frame and the door there is a 1.75 mm gap, fitted with a shaped gasket that prevents the visibility of light leakage between the frame and the door.

The snap-lock closures, completely invisible, allow the inspection hatch to be opened with simple pressure.

The F3 flush-to-wall inspection hatch is available in two versions:

1)“Over the frame”: aluminum profile flush with the drywall panel. Tiles are installed over the profile.
2)“Recessed”: aluminum profile higher than the drywall panel. Tiles are recessed into the profile.

Download free of charge from this Syncronia page the technical data sheets, brochures, technical drawings, and representative images of the product.