Floor Access Cover, 5000 and 7500 TH multi-door series Aluminium

Overview

Series 5000 and 7500 TH multidoor combines thermal protection with a multi-door layout while keeping a flush-to-floor finish. It suits large technical openings where a multidoor solution improves handling during inspections.

Technical features

The floor access cover is made of aluminium. The depth of the tray is 37 or 62 mm and the installation height is only 50 or 75 mm. It is equipped with three special gaskets along the entire perimeter. The frame is fixed by casting at floor level. The tray can then be filled and inserted into the frame. The lid is fixed to the frame by 4 tightening screws, and can be removed with special lifting keys. Filling is possible with tiles, concrete, resin, granite, self-locking, wood, hard floors or other materials. It includes an 80 mm polyurethane plate and FF Systems recommends using the EasyLifter for handling.

Project advantages

⦁    Smoother access management on large openings thanks to the multidoor layout.
⦁    Almost invisible when installed after finishing.
⦁    Easy opening thanks to the conical construction design.

Operational notes

During design, coordinate sizes, door subdivision and lifting operations based on expected inspection routines.

Download documentation on Syncronia

On Syncronia.com you can free download images, catalogues and technical data sheets download for Series 5000 and 7500 TH multidoor, with official information to integrate it into your project.